B2 Audio MA-6000.1
B2

B2 Audio MA-6000.1

$1,299.99

Product Description:

MA 6000.1 Taking the SLD series to the next level. 

The gauntlet has been thrown.

After extensive market research, a new breed of amplifiers were about to dominate the power vs cost segment. However most of such designs were inferior in terms of bass response, low voltage handling, and general abuse of the product compared to traditional half bridge Class D designs. Therefore B2 Audio decided to base our design on an existing platform, but with modifications that increase frequency range to 17.5 khz and in addition being a full bridge Class D design. These features made it possible to offer an amplifier that is able to reproduce dynamic sound, while allowing for overhead and having increased reliability compared to conventional amplifiers based on the same technology. 

The «ACCU8» crossovers gives you the ability to fine tune your amp like a pro. With 41 clicks, each with corresponding frequencies per click, it takes away the doubt of where exactly the low pass or the subsonic is set.

 

Specifications:

Frequency Response:

10 Hz ~ 17.5 kHz (+/- 1 dB)

Signal to Noise Ratio:

>85 dB

Input Sensitivity:

6 ~ 0.2 V

Crossover:

24 dB / Oct

High Pass Crossover :

10 Hz ~ 500 Hz 
(Subsonic)

Low Pass Crossover: 

35 Hz ~ 17 kHz

Band Pass Crossover:

 

Bass Boost Frequency:

30 Hz ~ 80 Hz / 0 ~ 12 dB

Damping Factor:

>300

Power Terminal gauge:

0 GA x 2

Fuse Rating:

500 A

Operational voltage:

10 V ~ 16 V

Dimensions:

22" x 10.23" x 2.44"
560 x 260 x 62 mm

Power @ 4 Ω 12v - 14.4v < 1% THD:

1150 watts - 1700 watts

Power @ 2 Ω 12v - 14.4v < 1% THD:

2200 watts - 3300 watts

Power @ 1 Ω 12v - 14.4v < 1% THD:


4200 watts - 6200 watts

Full Description
Qty
  • Description

    Product Description:

    MA 6000.1 Taking the SLD series to the next level. 

    The gauntlet has been thrown.

    After extensive market research, a new breed of amplifiers were about to dominate the power vs cost segment. However most of such designs were inferior in terms of bass response, low voltage handling, and general abuse of the product compared to traditional half bridge Class D designs. Therefore B2 Audio decided to base our design on an existing platform, but with modifications that increase frequency range to 17.5 khz and in addition being a full bridge Class D design. These features made it possible to offer an amplifier that is able to reproduce dynamic sound, while allowing for overhead and having increased reliability compared to conventional amplifiers based on the same technology. 

    The «ACCU8» crossovers gives you the ability to fine tune your amp like a pro. With 41 clicks, each with corresponding frequencies per click, it takes away the doubt of where exactly the low pass or the subsonic is set.

     

    Specifications:

    Frequency Response:

    10 Hz ~ 17.5 kHz (+/- 1 dB)

    Signal to Noise Ratio:

    >85 dB

    Input Sensitivity:

    6 ~ 0.2 V

    Crossover:

    24 dB / Oct

    High Pass Crossover :

    10 Hz ~ 500 Hz 
    (Subsonic)

    Low Pass Crossover: 

    35 Hz ~ 17 kHz

    Band Pass Crossover:

     

    Bass Boost Frequency:

    30 Hz ~ 80 Hz / 0 ~ 12 dB

    Damping Factor:

    >300

    Power Terminal gauge:

    0 GA x 2

    Fuse Rating:

    500 A

    Operational voltage:

    10 V ~ 16 V

    Dimensions:

    22" x 10.23" x 2.44"
    560 x 260 x 62 mm

    Power @ 4 Ω 12v - 14.4v < 1% THD:

    1150 watts - 1700 watts

    Power @ 2 Ω 12v - 14.4v < 1% THD:

    2200 watts - 3300 watts

    Power @ 1 Ω 12v - 14.4v < 1% THD:


    4200 watts - 6200 watts

  • Reviews

    Reviews

    Be the first to

  • Details

    Details

    Current Stock:
    SKU: B2-MA-6000.1