WLC -  The Amp Lab/Slam Panda Wireless Level Controller *PRE-ORDER*
On Sale
SKU: bk-sp-wlc-al-blue

WLC - The Amp Lab/Slam Panda Wireless Level Controller *PRE-ORDER*

$259.99
$224.99

89926289-618361328754687-8106274987607851008-n.png 

WIRELESS LEVEL CONTROLLER 

The Amp Lab and Slam Panda Systems have teamed up to bring you the BEST wireless level controller(bass knob) on the market!

 

 

FEATURES

  • WIRELESS! (of course) Bluetooth 4.0 LE Technology = No wired connections to remote level controller needed
  • OLED display shows Audio Output Level (graph and numerical), Vehicle voltage, Battery Life Indicator, and Wireless Connection Indicator 
  • L.E.D. Illumination
  • Full analog audio In-Out.  No audio signal is converted or transmitted via Bluetooth
  • High-quality digital potentiometers  
  • High-quality "Tiffany" style RCA connections
  • Up to 25 feet of range
  • USB-C Charging
  • Up to 18 hours of battery life
  • Battery protection (over discharge, over-charge, short circuit, over-current)
  • Wide frequency response (10Hz-50kHz)
  • Built-In "mute", full-attentuation button
  • Magnetic mounting plates for easy docking and removal
  • AND MORE!

 

 

HOW IT WORKS:

The Wireless Level Controller consists of two major parts.  The BASE and the REMOTE.  Aside from a few simple electrical connections, (B+, Ground, Remote), the base module of the WLC has standard RCA Input and RCA output connections just like a conventional level control knob such as the standard Slam Panda bass knob, LC-1, etc.  The RCA Input connects to your source unit (head unit, DSP, etc).  The RCA Output connects to your amplifier.  The remote connects to the base module via a very low latency Bluetooth LE 4.0 wireless connection.  When the knob on the remote is turned clockwise or counter-clockwise, a signal is sent to the base to raise or lower the audio output level.  The audio signal is not transmitted wirelessly or converted in any way.  It remains fully analog in and out of the base module.

 

If the remote becomes disconnected from the base module (powered off, battery dies, remote moves out of range), the audio level will remain at the point it was at when the remote lost signal.  This also allows you to set the audio output at a comfortable listening level and not have to have the remote powered on constantly.  It will remain at the same output level, even if the base module is turned off and back on.

 

The OLED display of the remote also provides useful information such as;

  • Vehicle Voltage with Super Fast Refresh Rate
  • Audio Output Level with Numerical and Bar-Graph Display
  • Wireless Connection Indicator
  • and Remote Battery Status  

 

 

SPECIFICATIONS:  

BASE Module

 Operating Voltage: 9VDC - 16VDC

 Active Current Draw: < 1A

 Standby Current Draw: < 1mA

 Max. Audio Input Voltage: 5.0V

 Frequency Response: 10Hz - 50kHz

 

REMOTE Module

Power Supply: 3.7V LiPo Battery (2.9V-4.2V)

Charging: USB-C (Non-Protocol), 5VDC

Charge Time: 3-4 hrs

Battery Life: 

- Without Illumination = up to 18 hrs 

- With Illumination = up to 11hrs

Rotary Encoder Life Cycle: > 30,000 Revolutions

 

Click here for the user manual >>> WLC User Manual

pandalongfortroy.jpg

 

Full Description
Qty
Expected release date is Oct 10th 2022
  • Description

    89926289-618361328754687-8106274987607851008-n.png 

    WIRELESS LEVEL CONTROLLER 

    The Amp Lab and Slam Panda Systems have teamed up to bring you the BEST wireless level controller(bass knob) on the market!

     

     

    FEATURES

    • WIRELESS! (of course) Bluetooth 4.0 LE Technology = No wired connections to remote level controller needed
    • OLED display shows Audio Output Level (graph and numerical), Vehicle voltage, Battery Life Indicator, and Wireless Connection Indicator 
    • L.E.D. Illumination
    • Full analog audio In-Out.  No audio signal is converted or transmitted via Bluetooth
    • High-quality digital potentiometers  
    • High-quality "Tiffany" style RCA connections
    • Up to 25 feet of range
    • USB-C Charging
    • Up to 18 hours of battery life
    • Battery protection (over discharge, over-charge, short circuit, over-current)
    • Wide frequency response (10Hz-50kHz)
    • Built-In "mute", full-attentuation button
    • Magnetic mounting plates for easy docking and removal
    • AND MORE!

     

     

    HOW IT WORKS:

    The Wireless Level Controller consists of two major parts.  The BASE and the REMOTE.  Aside from a few simple electrical connections, (B+, Ground, Remote), the base module of the WLC has standard RCA Input and RCA output connections just like a conventional level control knob such as the standard Slam Panda bass knob, LC-1, etc.  The RCA Input connects to your source unit (head unit, DSP, etc).  The RCA Output connects to your amplifier.  The remote connects to the base module via a very low latency Bluetooth LE 4.0 wireless connection.  When the knob on the remote is turned clockwise or counter-clockwise, a signal is sent to the base to raise or lower the audio output level.  The audio signal is not transmitted wirelessly or converted in any way.  It remains fully analog in and out of the base module.

     

    If the remote becomes disconnected from the base module (powered off, battery dies, remote moves out of range), the audio level will remain at the point it was at when the remote lost signal.  This also allows you to set the audio output at a comfortable listening level and not have to have the remote powered on constantly.  It will remain at the same output level, even if the base module is turned off and back on.

     

    The OLED display of the remote also provides useful information such as;

    • Vehicle Voltage with Super Fast Refresh Rate
    • Audio Output Level with Numerical and Bar-Graph Display
    • Wireless Connection Indicator
    • and Remote Battery Status  

     

     

    SPECIFICATIONS:  

    BASE Module

     Operating Voltage: 9VDC - 16VDC

     Active Current Draw: < 1A

     Standby Current Draw: < 1mA

     Max. Audio Input Voltage: 5.0V

     Frequency Response: 10Hz - 50kHz

     

    REMOTE Module

    Power Supply: 3.7V LiPo Battery (2.9V-4.2V)

    Charging: USB-C (Non-Protocol), 5VDC

    Charge Time: 3-4 hrs

    Battery Life: 

    - Without Illumination = up to 18 hrs 

    - With Illumination = up to 11hrs

    Rotary Encoder Life Cycle: > 30,000 Revolutions

     

    Click here for the user manual >>> WLC User Manual

    pandalongfortroy.jpg

     

  • Reviews

    Reviews

    Be the first to

  • Details

    Details

    Current Stock:
    SKU: bk-sp-wlc-al-blue